​Quantel/Big Sky q-switched pulsed yag laser

Quantel/Big Sky q-switched pulsed yag laser frequency doubled to 532nm-Big Sky/Quantel oscillator/amplifier rated for 125mj/pulse @ 532nm, or 250mj/pulse @ 1064nm, @ 6ns pulse width adjustable rep-rate currently running at 28 Hz but adjustable .1 to 40 Hz rep-rate. Power can be increased to nearly 200 mj/pulse@ 532nm or 400mj/pulse @1064nm. System is computer controlled by rs-232 or rs-485. Uses Teraterm freeware, or customized windows software available at no change. Power supply is similar to a computer tower and runs on 120v, or 220v, single phase,  voltage auto-switching. Beam profiles are included in pictures. Lasers are in excellent condition, and come manual and 90 day warranty. Additional 50,000,000 shot, new lamps are available for purchase. More than 10  systems available.  Original acquisition cost nearly $100,000 US. Price..... $8,250 US

​Coherent Chameleon

Coherent Chameleon, 3.5 watt tunable femtosecond laser system complete. Comes with Chameleon with power supply, Chiller, air filter manuals, internal 18 watt Verdi pump, excellent condition, over spec,  with 9,700s hours use. Set at low power, output at approx. 2 watts. Price.....Call for pricing

​Coherent Chameleon

​Coherent Chameleon, 3.5 watt tunable femtosecond laser system complete. Comes with Chameleon with power supply, Chiller, air filter manuals,. excellent condition, over spec,  with 12,400 hours use. Price.....Call for pricing

Coherent Verdi/Mira 900 Ultrafast

Coherent Verdi/Mira 900 Ultrafast, Coherent Verdi 5 watt pump with a Mira femto-second laser, Mira 900 controller, MRU-1000 air dryer, all cables, dryer hoses, manual, etc. Approximately 4500 hours use. Excellent condition, Price.....Call for pricing

​Coherent Equinox-Pilot laser system

Coherent Equinox-Pilot laser system for use in crystalline-silicon(c-Si) solar cell manufacturing production.  It is configured with a load/unload wafer turntable and two Coherent laser systems.  The first is a Coherent Talisker 355-4 (4W @ 355nm), and the second is a Coherent
Avia 355-20 (20W @ 355nm).  This system was manufactured in 2009 and has less than 100 hours of use.  The original acquisition cost over $750K. ​Price.....call for pricing

Spectra Physics Light Conversion Topas-C, model TC8U3WS

Spectra Physics Light Conversion Topas-C, model TC8U3WS in like new
condition, manufactured in 04/09. Price.....call for pricing

Spectra Physics Ultrafast laser system.​

​Spectra Physics Ultrafast laser system.  Tsunami, Millennia Pro, Thermo Neslab chiller model #KMC 100, 3955 mode locker control, SP 3910 air purge. Tsunami is femtosecond and picosecond version, model number 3960d-M1S. This is a full system, including manuals, all cables, hoses for air purge, chiller hoses, power cords, etc, and in unused condition. Purchased for a project in 2005, and never turned on. The Spectra Physics OPA-800c has been used and manufactured in 2003. Price......Call for pricing

Coherent Chameleon, tunable uftrafast laser system​

Manufactured 2004, with chiller, air purifier, laser  head with power supply. Excellent condition with all hoses, cables, etc. Rated 2.5 watts avg. power with tuning range of 690-1020nm, peak power 200kw, pulse width 140fs, rep rate 80mhz. Price.....call for pricing

​Applied Materials/Applied Baccini UV Laser Edge Deletion

Isolation system for crystalline silicon photovoltaic cell production / Manufactured 2011 / Includes Coherent AVIA 355-28 / 28 watts @ 355 nm / 400 VAC, 3 Phase, 50-60 HZ power required Unit is like new condition with very low hours. Price........call for pricing

​Convergent Energy Gemini Co2 cutting system

Convergent Energy Gemini, with Diamond 84 output over 300 watts. Vacuum chuck cutting bed, xyz of 18" x18" x12" precision cutting table with .0005 accuracy and .0005 repeatability, and fiber light/off axis camera system. Unit is in excellent condition with full set of manuals. Price.....call for pricing

​CFR-200/40-532, pulsed q-switched yag laser

​Output is 100 mj/pulse @ 40 Hz, @ 532nm. Excellent condition. Price.....Call for pricing

Quantel Brilliant B pulsed YAG laser

​Quantel Brilliant B pulsed YAG laser. Quantel pulsed q-switched
frequency doubled YAG laser. Specs are 10 Hz rep rate, 5ns pulse width,
400 mj/pulse, power is 115Volt single phase. Pictured at 2.25 watts
output at 532nm. Excellent condition, with manual. Price......call for
pricing.

​PIV-CFR-200/40-532-Q-switched frequency doubled YAG

Can run up to 40 Hz reprate, 100mj/pulse @ 532nm, <10ns pulse width. Power meter shown at 8 watts average @ 40 hz @532nm. Excellent condition. Price......Call for pricing

Coherent DEOS EOM-10, OSC/Amp

Coherent EOM-10, Q-switched pulsed co2 laser system complete, including 14 watt oscillator, amplifier producing approximately 40 watts amplified signal, all cables, manuals, power supplies, mounted on breadboard with turning mirrors. Wavelength 10.6 microns >10 watt @100khz, pulse width <13ns, pulse rate 0hz-130khz, vertical polarization. This system has less than 40 hours use and is in excellent condition. Also, we have oscillators only if your needs do not require amplifier power,  Oscillator only will output over 10 watts. Pictures of laser in full operation coming soon.  Price.....Call for Pricing

​New Wave Polaris II-40Hz/532

​New Wave Polaris II-40 HZ/532-Q-switched yag frequency double to 532nm, when set at 40 hz, output is 28mj/pulse and 10 hz is 26.2mj/pulse @ 532nm. System can be varied in power as it has an internal variable attenuator and variable pfn adjust. Operates on 120v and is self contained water cooling. Excellent condition. Comes with manual. Price.....call for pricing

New Wave MiniLase III/20-532​

​New Wave MiniLase III/20-532, Pulsed q-switched yag operating at 20 Hz Producing 5.5mj/pulse @20 Hz @ 532nm. Low power produces 750 microjoules  per pulse. Both settings are adjustable internally in power supply. Very good condition. Price.......Call for pricing

​New Wave Solo I -15 hz twin PIV laser.

New Wave Solo I -15 hz twin PIV laser. This laser has frequency doubling to 532nm with output rated at 30mj/pulse, q-switched. Manufactured in August 2001, in good working condition. Price....call for pricing

Kolmar Technologies MTC Longwave High Speed Photodiode KV 104-0.1

Kolmar Technologies high speed infrared photodiode (MCT), 10.5 - 11.5 microns with Kolmar low noise high speed amplifier, KA-500 (or may be Raytheon amp). Price...call for pricing

Spectra Physics Quanta-Ray GCR-250/30 q-switched YAG laser-Quanta-Ray GCR-250/30​

​Spectra Physics Quanta-Ray GCR-250/30 q-switched YAG laser-Quanta-Ray GCR-250/30, 30 Hz rep rate, q-switched YAG laser with second harmonic type II doubling crystal, heater, and 532nm separator complete. This system has output of 27 watts average, or 900mj/pulse at the fundamental 1064nm. Output is about 1/2 that at 532 approx. 450 mj/pulse @ 30 hz. Price......call for pricing

Surelite II

Continuum Surelite II-20 YAG laser-Continuum Surelite II-20, 20 Hz rep rate system, frequency doubled, and tripled, rated 550mj/pulse @ 1064nm, 250mj/pulse@ 532nm, and 120mj/pulse @ 355nm. Laser is in perfect working condition, just refurbished, and comes with manual. Will need a harmonic separator. Price.....call for pricing

American Electronic Laboratories-1180 Frequency Converter/Attr-2193 receiver combination

ATTR-2193 Tempest qualified receiver in excellent working order, and  calibrated. The A.E.L. 1180 frequency converter increases receivers  range to 18 Ghz. controlled by fiber optic by the receiver. This item can not be exported from the continental U.S. This wide band receiver qualifies EAR 5A980 by the state department and once again can not be exported. And as can be seen from the photo, the narrowest bandwidth is 200 hz. IF and Video bandwidths range from 200 Mhz to 200 Hz.  Maintenance and operation manual included. Units are in excellent condition. 3 receivers, 2 1180's available. Price.....Call for Pricing

Micromachining System

MM5800 dual beam, by ESI-ESI MM5800 micromachining system employing two IPG 700 watt fiber lasers single mode, with twin Laser Mech beam delivery. This machine is capable of 2500 holes per second, was set up for drilling/cutting .030" (750 micron) aluminum with .012" (300 micron) holes. Can be used for any machining drilling or marking. Has twin cameras, both wide, and fine, with micron accuracy. System was never in service only used for some testing. Looks new with low hours. Cutting bed 533mm x 635mm, with "z axis of 40mm. See spec page below. Price...........call for pricing.

IPG 700 watt Fiber Laser model YLR-700-sm

New in the manufactures crate, IPG-700-sm. Below are some snap shots of the unit being removed from crating and vacuum bag packing, only opened to get pictures. Three units were manufactured 2008/2009 with delivery 2009 all with "0" hours and sealed in original crates, ready for immediate shipment. These lasers are rated at 700 watts average, single mode, and can be internally modulated up to 5 Khz. by hand controller which is included. All cables, accessories, controller, etc are included with each laser. Voltage requirements, 220, 11 amps. single phase, water cooled. Manual included. 7 lasers available. Price......Call for pricing

IPG YLP-10 pulsed 532nm fiber laser

IPG 10 watt fiber laser, from 10khz to 300khz pulse rate in excellent condition with less than 290 hours use. Output is 532nm at 10 watts, manufactured 2012. Price......call for pricing

​IPG pulsed, q-switched fiberlaser, model GLPN-40-1-24-R

IPG pulsed, 532nm green, q-switched fiberlaser, model GLPN-40-1-24-R in excellent working condition, manufactured in 2014 with low hours. Shown with output of over 24 watts @532nm, q-switched. Will pulse up to 1200khz. Shown running at 900khz. Price.....call for pricing​

Red Power 40 watt fiber laser

​Red Power 40 watt fiber laser with collimator at end of fiber output. Good condition. Price.....call for pricing

Spectra Physics MOPO 740

Can be used with the GCR-PRO-250. Excellent condition. Price...Call

Continuum OPCPA

(Optical Parametric Chirped-pulse Amplification) pulsed doubled YAG-Manufactured 2010 / Very short rise and fall times (200 picoseconds) / 4.5 J @ 532 nm / 6 nsec pulse width / 2 Hz rep rate / additional pictures available upon request. Excellent condition. Original acquisition cost over $650K. Price....call for pricing

​Spectra Diode Labs SDL-830

Spectra Diode Labs SDL-830, 50 amp diode driver with cooler control. Good condition. Price....call for pricing

Exfo-WA-1500 wave meter

400nm to 1100nm, with accuracy of .0002nm. Excellent condition. Below are spec. pages and description.Price......Call for pricing

Lee Laser LDP200MGQ

Diode pumped, q-switched, 532nm, with 618 hours use. This laser is in like new, excellent condition, manufactured in 2009, with only total use of 618 hours. I have tested this at only 25 watts output with pictures running at an arbitrary q-switch setting. This system runs on 208/220 single phase and is rated up to 60 watts. It takes a small chiller or city water for cooling the built in heat exchanger. System has LCD or rs232 touch screen operation.  Price.....call for pricing.

Laserdyne 780 W/Lumonics JK-704 driller/cutter

Lumonics laserdyne 780 6 axis cutting/drilling system. Just removed from service. Has Lumonics beam director, comes complete with Neslab hx-750air cooled chiller. Price.......call for pricing

Laserdyne 550 W/Lumonics JK-704 driller/cutter

Lumonics laserdyne 550 6 axis cutting/drilling system. The laser and one rotary has just been sold off the system. Has Lumonics beam director, comes complete with Neslab hx-750air cooled chiller. The rest of the unit will be sold for parts. Extra pictures upon request. Price.......call for pricing

Laserdyne 410, Aerotech modified

This welding system uses a JK701 pulsed YAG 400 watt laser with twin fiber output, internally a 16" x 16" x 6" xyz stage with an 8" rotary and an external xy stage of 10" x 10", with 6 axis of Aerotech A-3200 control. All manuals, lamps, many extras included. The pictures shows when in operation.Price.....call for pricing

Spectra Physics UV-355 Tristar-1000

Spectra Physics diode pumped Tristar 1000 laser system producing 840mw, not optimized, but near spec. power. Q-switched 355nm laser system pictures taken in operation at 20Khz. Better pictures to follow. Unit is in very good condition.Price......call for pricing.

Synrad D-48 Duolase CO2 laser

​Synrad D-48 Duolase CO2 laser-This laser runs on 120 volt, and does not need a dc power supply. There are two tubes independently in series for the output, each tube rated 20 watts, for a total of 40 watts rated producing 48+ watts, water cooled with controller. You can select 1 tube or both. Good condition. Price....call for pricing

​Synrad j-48-1 10 watt co2 laser

Synrad 48-1 rated 10 watts, with Power One power supply, and controller with Ray Merrill  stabilization board, producing over 16 watts . Three units available. Excellent condition. Price.......call for pricing

​Synrad 48-1 co2 laser and power supply

Synrad 48-1 co2 laser with power one power supply in excellent condition. Laser is rated at 10 watts, producing over 15 watts. Price.......call for pricing

Coherent D-64 head in original crate

Coherent Diamond 64 head in excellent condition. Head only Price....call for pricing

Spectra Phsics Ultrafast system

System includes picosecond Spectra Physics Tsunami driven by a Milennia diode pumped laser, Spectra Physics Spitfire amplifier, driven by a Spectra Physics Merlin,  Price.....call for pricing

Spectra Physics HeNe model 127

Perfect working order with output at 40 mw,  well over rating. Mf'd 2000. Price....call for pricing

Spectra Physics HeNe model 127

Perfect working order with output at approximately 40 mw, has twin polarization separators with separate horizontal and vertical beam outputs 12-14mw each. Mounted on a very nice rail with a TSI 9162 Photomultiplier. The separator/beam polarizer was also manufactured by TSI.  Mf'd 1996. Price....call for pricing

New wave Pegasus XR

New Wave Pegasus XR diode pumped, pulsed q-switched 523nm, 2Khz laser system. Price...call for pricing

Jdsu Q333-HD 355nm UV laser head with power supply

This laser manufactured in 2007 and just had slightly used diodes installed. Great for Micromachining. Producing 3+ watts of 355nm UV  Price......Call for pricing

Coherent K-500 CO2 laser OEM

Coherent K-500-oem power supply tested and guaranteed working.  Price.......Call for Pricing

LTG250 Grating Tunable Co2 Laser System

LTG250 tunable 9.2-10.8 microns, with an output power of 25 watts minimum on strongest line, TEMoo, polarization linear, vertical, sealed off Co2 with ZnSe Brewster windows, beam diameter 4.5mm, Invar stabilized. Excellent condition, low hours usage, with manual.  Price....Call for pricing ​

Edinburgh Instruments PL2-M Grating Tunable Co2 Laser system

The PL2-m grating tunable laser is a compact user replenishable gas discharge tube with two Brewster windows, with invar stabilized system. Using model LPS-2 short term stability of better than +/- 1%. Under normal usage, the gas supply lasts for about 2 years or better. There is a fitting to pump and refill the gas mix at the rear of the tube. We also have the gas mix bottle. Typically 60 lines in the 9-11 micron range of the normal gas mix. Many other lines when used with isotopic gas mix. Specs are: 4.8mm diameter beam at output coupler, <6.5 mR divergence, Polarization vertical, 10 watts output. Excellent condition, with manual. Price.......call for pricing

Coherent D-62, 80 watt, Co2 laser New, Unused

Excellent condition with manual, manufactured in 1996 new unused laser system with Coherent paperwork. Price....call for pricing

Dynamic Sciences R-1250A with accessories

Dynamic Sciences Tempest qualified wideband receiver from 100 Hz-1 Ghz, AM, Fm, video, with bandwidths selectable from 50 hz to 200 Mhz. Also included is the I-1700 impulse generator, r-1160 antenna/attenuator interface, the 1250-20a wideband adapter. The wideband adapter is not needed as the receiver has this option and already covers up to 200 mhz bandwidth. Note, this receiver or any parts may not be shipped out of the country as it is classified 5a980 by the state dept. Price....Call for pricing

Anritsu 37369a, 40 Ghz. network Analyzer

40 Mhz. to 40 Ghz. 4 channel network analyzer. Calibration checked, unit in perfect working order with manual. Condition Excellent. Price.....call for pricing

Spectra Physics Tristar 1000

Sp Tristar 1000 diode pumped air cooled laser system. More details will be added after testing.Price.....Call for Pricing

 Hp 8565ec 50 Ghz color portable spectrum analyzer

Hp 8565ec color 50 ghz analyzer 9-khz to 50 ghz on 2.4 mm input connector. Comes with HP warranty to Nov 2013. Unit calibrated by HP. 2 Units available. One 30 Hz to 50 Ghz, the other 9khz to 50 Ghz. Price.... Call for pricing

Spectra Physics Tristar 2000

Sp Tristar 1000 diode pumped air cooled laser system. More details will be added after testing. Price.....Call for Pricing

Time Bandwidth Duetto, picosecond laser

Time Bandwidth, Duetto 1054nm diode pumped picosecond laser, rated 10 ps, 10 watts average, at 1064nm with a rep rate of 50 Khz to 4 Mhz, 200 micro-joules/pulse. Details are on their website. Some preliminary testing done. Picture of  laser producing 8 watts average at the frequency selected. More to come. Price......Call for pricing

Hi Q Ultrafast laser

Hi-q ultra fast laser system, diode pumped, including all cables, controllers, etc. More specs. will be available shortly.Price.....call for pricing

 7.5 ton water cooled chiller

Used for the JK-701h laser systems above. These chillers can be used in a lab without heating the room temperature.

JDS Uniphase/LIghtwave  UV-610-fhg, 266nm 2 watt laser

Laser rail with power supply, low hours as per pictures, producing 7 watts of q-switched 532, and 2 watts of 266nm UV. Laser is in excellent condition with only 75 hours on doubler crystal. Price.....Call for pricing

Synrad 48-2 CO2 laser

Comes with built in 120 vac. power supply, just plug it in the wall. Has less than 10 hours use on it. Excellent condition Price......Call for pricing

Newport 1930C power meter

Like new condition. Price......Call for pricing

Lumonics HSL-2 Ruby Holo-camera

This holographic camera is rated at 1 joule/pulse and can be double pulsed. Inter pulse spacing is adjustable from 1-1000 microseconds, and pulse width is nominally 30 ns. It has oscillator and amplifier along with all of the normally external optics built into the laser bed cabinet as one unit. This system can be made portable, stand alone. There is a reference beam attenuator, reference beam path length changing prisms to extend or shorten the path length, a 45% mirror on reference beam extension tube to illuminate the plate holder and plate holder. Comes with full set of manuals, and drawings.   2 systems available. Price...Call for pricing

Spectra Physics GCR-190/100

Spectra Physics/Quanta ray GCR-190 pulsed YAG laser, rated 325mj/pulse @1064nm, and 120mj/pulse @532nm @ 100 Hz. rep rate @ 7ns. pulse width. Spec. sheet test says 350mj/pulse @1064nm and 130mj/pulse @532. The system is in excellent condition recently acquired from Yale University. Frequency doubler with harmonic separator dichroic mirrors. System comes with manual. Price...................Call for Pricing        

Spectra Physics TSC-2 dye circulator

in good condition

Perkin-Elmer Optical Integrating Sphere model number 139941

Comes with carrying case. Price......Call for pricing

Coherent Infinity Parts

Optical parts for head including optics, mirrors, power meters, telescopes, frequency doubler, frequency tripler, diode oscillator, etc. Also, electronic parts, power supplies, circuit boards, control boards, IGFET, etc. Price.......Call for Pricing

New Wave 532nm pulsed Laser

New Wave 532 nm pulsed, q-switched doubled yag laser with variable aperture x, and y for lcd correction. This laser runs at 1 Hz reprate, or fired manually. Output is about 1mj. of green light for micro drilling, lcd correction, etc. Price......Call for Price

​Coherent Labmaster power meter with LM-2 head and amplifier

​Coherent Labmaster power meter with LM-2 head and amplifier in Samsonite carrying case. Very nice condition. Price....call for pricing